Blast Zone

Brunswick Bowling Balls. The Blast Zone brings an updated version of bowling's first asymmetric core, the Phantom core. The Blast Zone is sure to blow your mond and Blast yopur competition.For 2007, Brunswick is bringing back an updated version of the bowling industry…trades original asymmetric core. The Phantom core was the first core with a two pin design and a built in Preferential Spin Axis PSA. The ABCUSBC used the Phantom core to establish the original RGmin and RGdiff specifications for the system of bowling. By using an updated version of the Phantom core, Brunswick has increased the asymmetric differential of the Zone line from 0.017” to 0.020”. Combined with Activator coverstock and a 800 grit wet sand finish, the Blast Zone upgrades the Strike Zone in the Zone Asymmetric line.The Blast Zone uses a hybrid version of Activator coverstock, combining the Activator Solid from the Ultimate Inferno¦reg with the Activator Pearl from the Original Inferno. The Blast Zone retains the popular Activator ball reaction. Clean through the heads, but with an early revving type of roll, that promotes mid lane recovery and a powerful but continuous breakpoint.Out of the Box With its 800 grit wet sand surface, the Blast Zone is an ideal asymmetric ball on medium to oily lane conditions.If your Blast Zone goes too long Dull the surface using 600 grit or rougher abrasive. The hooking action will increase and its arc will become more even, creating a better match up for oily lane conditions and for smoothing overunder reactions seen on wetdry lane conditions.If your Blast Zone hooks too early Smooth the surface with 1000, 2000 or 4000 grit abrasives to create more length. If your Blast Zone still hooks too early, polish the surface with either Brunswick…trades Factory Finish “High Gloss Polish” or “Rough Buff”. High Gloss Polish creates more length than Rough Buff.